Foot Rail Kits with 2" Tubing and Components

Foot Rail Kits with  2" Tubing and Components include all parts necessary for a professional foot rail installation

(for 1.5" go here)

Choice of bracket type (combo, bar mount, floor mount) and end cap type (flat, domed or fancy flat) for same low price.

Note: Brackets and end caps shown in pictures are for illustrative purposes only.  Every package comes with a selection of brackets and end caps.  The brackets and end caps you select are the ones that will be delivered with the package.

READY- TO INSTALL Bar Foot Rails include brackets, screws, splices and end caps for bars with a single side OR multiple sides not connected with elbow fittings.

IMPORTANT: ATTEMPTING TO CONNECT KITS USING ELBOWS FOR MULTIPLE-SIDED BARS MAY RESULT IN IMPROPER LENGTH TUBING AND BRACKET SPACING FOR YOUR APPLICATION

Foot Rail Kit Sizes Are Measured From End of End Cap to End of End Cap on Opposite Site. The total length with end caps attached is nominal but is accurate to the total length ordered +/- approx. .5”.

There is no charge for cutting - to order odd size kits, select length desired to the next whole foot then reduce by the required number of inches The number of brackets supplied may be reduced to maintain proper bracket spacing.

Tubing for these packages are segmented and joined by splices. You can see examples of how various size bar foot rail packages are configured by clicking here (will open in a new window) or going to the "Tools & Info" menu, above.  Make sure that the bracket placement is appropriate for your application.

Foot Rail Packages are available in many finishes on-line and hundreds of additional specialty finishes are available by phone. Please call for any finish not available online 877-747-2457.